MSHA Chamber for Mid Seams
- CoalSAFE MSHA MS Design

The CoalSAFE MSHA Mid Seam Refuge Chamber is designed for underground coal mines with a minimum seam height of 56” (1.4m). The refuge chamber can be custom designed to client specifications, but typically features 12, 16, 20 and 24 person configurations.

The CoalSAFE Mid Seam Refuge Chamber is approved in the United States by the West Virginia Office of Miners’ Health, Safety & Training and built to the Mine Safety & Health Administration (MSHA) Federal Regulations ’30 CFR Refuge Alternatives for Underground Coal Mines’.

ENQUIRE
BROCHURE

MSHA Chamber for Mid Seams – Front View

The ‘face’ of the CoalSAFE MSHA Mid Seam Refuge Chamber is designed primarily for easy identification and quick access during a coal mining emergency. The reflective signage alerts passers-by to the refuge chamber’s location, whilst the interlocking rotating door handles provide simple, straight forward access to the safety of the interior airlock.

The CoalSAFE has been engineered to ensure ease of transport and robust design. Constructed from explosion resistant steel plate with external support wraps and surround package as standard, the refuge can withstand in excess of 15psi overpressure with no permanent damage. Push points, forklift slots and towing and lifting eyes are provided top and bottom on front and rear.

Explosion resistant steel plate with external support wraps and surround package, built to withstand in excess of 15psi (103kPa) overpressure.

On roof of chamber.

Safety and operational signage in reflective stickering for high visibility underground. Translation into a second language available.

The skid base provides ease of mavoeuvrability, featuring 250 x 100mm forklift slots, front and rear mounted tow points and front mounted 25mm steel plate push blocks.

High durability white paint for underground visibility. Sand blasted to 2.5 grit.

Outward opening door, featuring double locking rotating handles. The vacuum tested seal maintains a positive internal pressure.

MSHA Chamber for Mid Seams - Interior View

Inside the MineARC CoalSAFE MSHA Mid Seam Refuge Chamber, a number of vital systems combine to create a safe, ongoing environment for
occupants.

The MARCis intrinsically safe Carbon Dioxide (CO2) and Carbon Monoxide (CO) Scrubbing System does not require any electrical power to operate. The active chemical scrubbing system is designed to clean the air of these harmful gases and toxins that build up over time within a sealed, occupied environment. In addition, the MARCis incorporates a non-electrical air conditioning system that both cools and dehumidifies the refuge chamber.

Utilising a sequential operating procedure, MARCis can be activated in less than 60 seconds during an emergency.

MineARC seating is ergonomically designed to provide suitable comfort during entrapment. Made from durable, hard wearing fabric, the seating provides 500mm of space per person.

To maintain the internal atmosphere of the CoalSAFE, the MARCis incorporates a nonelectrical air conditioning system that both cools and dehumidifies the refuge.

Operating procedures are located on the wall of the refuge chamber, as well as within hardcopy manuals. Operating procedures can be translated into a second language.

The MARCis (Intrinsically Safe) scrubbing system does not require electrical power to operate. The system scrubs the air of CO and CO2 build up.

Comparison Table

Capacity *
Intrinsically Safe System **
MSHA Compliant ***
 48hr Duration 96hr Duration 5psi Blast Resistance 15psi Blast Resistance Low Seam Construction High Seam Construction
12-20
12-24
8-20
12-24
8-30
  • * Capacity Every safe haven is built with a certain rated occupancy in mind. The life support systems are designed to safely house this number of people for the designated duration..
  • ** Intrinsically Safe System CoalSAFE Refuge Chambers do not require any electrical power to operate..
  • *** MSHA Compliant Certain CoalSAFE models are approved in the United States by the West Virginia Office of Miners' Health, Safety and Training and are built to the Mine Safety and Health Administration (MSHA) federal regulations '30 CFR Refuge Alternatives for Underground Coal Mines'.