Disaster Relief

Extreme Weather Shelter for Australian Outback

A disaster and extreme weather shelter were designed for Australian iron ore company Atlas Iron. This very different type of refuge chamber; MineARC’s first StormSAFE cyclone shelter.

For their operation in the Northern Pilbara region, an area prone to extreme wind conditions and tropical cyclones, Atlas recognised the advantage of providing on-site storm shelters at their largest Port Hedland facilities.

extreme weather shelter australia
StormSAFE Extreme Weather Shelter in Australia

The use of shelters eliminates the requirement to send staff to Perth during an extreme weather emergency, and allow them to continue production and processing as normal all the way up to a ‘blue’ alert.

Atlas commissioned MineARC to design and engineer two custom StormSAFE chambers, large enough to safely house 72 people during extreme weather, and within the Australian Building Code’s ‘Region D rating’ for tropical cyclones with wind speeds in excess of 300km/hr.

The resulting chambers were built to comply with Australian and New Zealand Standard AS/NZS1170.2, with a Building Code of Australia Importance Level of 4. A four-piece modular unit that bolts together to provide approximately 105m2 of internal space, the refuge is easily disassembled and fully portable, allowing easy relocation.

A clever, compact design, the StormSAFEs each offer bedding for up to 54 persons, ample seating, a kitchenette and dual toilet facilities.

MineARC’s dedicated engineers utilised airflow simulation software to study the effects of severe weather conditions on the structure, as shown in the table below.

 

StormSAFE-front-wind-loading-graph
Figure 1: Front wind loading of 99m/s (350km/h) – provides MineARC engineering with pressure and suction loads on the chamber; Pressure in Green/yellow/red and Suction in shades of blue

A full team of around 25 experienced MineARC technicians, electricians and mechanical engineers worked tirelessly to custom build and inspect the two units, successfully meeting the tight deadline requirements.

 

“The MineARC team from initial concept discussions through to handover on site have provided a professional service,” said Trevor Beattie, Capital Works Manager at Atlas Iron. “The design of the StormSAFE product evolved during construction to meet the conflicting requirements of two separate end user locations. The StormSAFE shelter met all the Technical Criteria and the internal fit-out provides total flexibility for seating arrangements within the two centre modules. A special thanks to MineARC for their determination in delivering the product to schedule and at a level that was promised at the outset.”

 

The StormSAFE’s unique modular design means it can be customised and adapted to meet any client specification, particularly in regards to size, occupancy and internal features.

 

If you are interested in storm shelters for your site, please contact us or click here for more information.

 

Interested in finding out more? Click on one of these related articles.

Cyclone Season Impacts Coal Region "In the devastating aftermath of Tropical Cyclones Marcia and Lam, Queensland and the Northern Territory are still struggling to deal with the trail of destruction left behind." Continue reading.

Controlling the Temperature in a Refuge Chamber "It is crucial to the occupant's health and wellbeing that internal heat levels do not reach fatal levels, this is achieved by controlling the temperature in a refuge chamber.” Continue reading.