During 2015, Kamoto approached MineARC regarding the prospect of implementing a fully integrated stench gas network on-site in order to improve their broader Emergency Response Procedure. They required an automated system that would cover an underground area of around 5km, with the ability to disperse stench gas within 10 seconds to all active regions of the mine. Resulting in the development of a custom Electric Stench Gas Mine Alert System.
MineARC has been given the opportunity to once again work closely with Kamoto Copper, an underground copper and cobalt mine located in the Katanga Province of the Democratic Republic of the Congo.
Kamoto Copper place a strong emphasis on safety within their operations and are no stranger to MineARC safety products. In 2014, our MineARC Africa team worked closely with Kamoto to integrate two 30-man MineSAFE Standard Design Refuge Chambers and three MineSAFE Permanent Refuge Bays into their emergency response plan.
MineARC Engineer Sebastian Acosta worked with Kamoto to design a network of 10 stench gas units and two anti-stench units that can be remotely controlled by an above-ground master controller via a series of six underground sub-controllers. The fibre optic platform utilises a PLC system to transmit a signal from the master controller to the stench gas units, which when activated in an emergency will release short, measured bursts of stench gas throughout the mine’s ventilation system. Once the all-clear has been given, anti-stench can be released to efficiently neutralise the smell of the stench gas.
Kamoto chose MineARC’s electric stench gas system over other manual options in order to rule out the possibility of human error during emergency activation. The above ground master controller removes any need for interaction with the units underground during a crisis. Each stench gas unit does, however, feature a manual override button if required.
“The MineARC Stench Gas System represents a great leap forward in terms of safety in the mining industry in the Democratic Republic of the Congo”, says Greg Dala, Senior Ventilation Engineer and Mine Rescue Coordinator of Kamoto Copper.
All of the units supplied to Kamoto are mounted on custom MineARC stands which will be bolted into the ground for stability. The units are powder coated red for emergency stench gas and blue for anti-stench, with beacon lights for easy identification in low light conditions.
Interested in finding out more? Click on one of these related articles.
Are Stench Gas Mine Alert Systems Flammable? MineARC Stench Gas cylinders are loaded with Ethyl Mercaptan, pressurised with a non-flammable gas and further pressurised with nitrogen. A standard one-litre cylinder of MineARC Stench Gas contains 100g of Ethyl Mercaptan and can be distributed efficiently through approximately 620,000 cubic metres of air in an underground mine, operating within a temperature range of 1°C to 54°C. Continue reading.
System Intelligence: Advanced Safe Refuge Technology "Designed to provide real-time monitoring, communication and system diagnostics, the Intelligence product suite provides significant cost saving advantages to sites, whilst taking standards in industrial safety to the next level." Continue reading.
WA DMP Refuge Chamber Maintenance Requirements "Poor refuge chamber maintenance, including inadequate part replacement and irregular servicing, has prompted an official response from the West Australian government." Continue reading.